Black Friday3 months free · valued at up to $1,250Book by Thanksgiving
Sunwise Energy
(610) 228-2480
Back to articles

Solar Panels on a Slate Roof: What PA and NJ Homeowners Should Check

Have a slate roof and want solar? Learn what needs checking, then talk with Sunwise about your home's roof and solar options before committing.

Sunwise TeamPublished
In this article

Short answer: Some slate roofs can accommodate solar, subject to structural, roof-condition and mounting assessment. Slate can be damaged by concentrated loads or careless access, and damage can compromise weather protection. A proposal needs: a roof condition check first, a mounting method designed for slate, flashing done the way slate flashing is done, a plan for any slate damage, and a crew that can show you slate work it has done before. If a quote treats your slate roof like asphalt shingle, fix that before you look at the price.

Sunwise's solar consultation process starts with the property, including a review of roof potential. For a slate-roof home, tell our team about the material at the outset so project availability and any specialist assessment can be discussed before you choose equipment or payment terms. The questions below help you prepare for that first conversation.

This guide lists the questions a slate roof adds to the solar decision. It isn't a claim about which products or crews are right for your house, and it isn't a roofing service page. The general questions about roof age, orientation and shading are in the roof readiness guide; the slate-specific ones are below.

Why slate is different

Slate is a stone roof. Each piece is hung on nails through the deck and laid in overlapping courses, and the system sheds water because every slate is intact and every overlap is right. Two things follow.

First, slate doesn't tolerate point loads or foot traffic the way shingle does. A federal construction specification for slate roofing says: "Under no circumstances shall any foot traffic be allowed on newly installed slates or existing slates to remain," and it calls for inspections using remote access rather than walking the roof (UFGS 07 31 26, Slate Shingles, August 2025). That federal project specification illustrates the importance of protecting slate; it is not a universal installation code for every PA or NJ home.

Second, the proposed attachment must suit slate and transfer loads to the supporting structure without relying on fragile roofing pieces. Solar Slate Solutions describes one manufacturer's slate-specific approach. Its product description establishes that specialized methods exist; it does not establish suitability for your roof or a method offered by Sunwise. Ask for the selected system's instructions and a qualified assessment.

Question 1: What condition is the slate in, and what's under it?

The same specification describes how existing slate is checked for continued use: "verify each slate for tightness and continued use. Perform testing with broad, flat-nosed, slater's pliers," and "cracked slate shall not be used." Age by itself isn't the issue. The slate hardware manufacturer above says "age alone isn't disqualifying" and that "good slate can last a century," and the federal spec treats sound existing slate as something to keep. Condition is the issue: delaminating or soft slates, failed nails, deteriorated flashings and an aging underlayment or deck change the picture, and the deck's ability to carry an array is a structural question in its own right.

Ask for: a slate-specific condition assessment by someone who works with slate, covering the slates in the array area, the nails and underlayment, the existing flashings at valleys and penetrations, and the deck and framing. If the roof needs slate repair, that work comes before the solar, and the quote should say who does it and what it costs.

Question 2: How will the array attach, and how will the attachment be flashed?

This is the heart of the slate question. The answer should name the mounting method and explain how water is kept out at every attachment point.

Slate flashing has its own conventions. The federal specification calls for 20-ounce copper flashing and slates fitted "neatly around pipes, ventilators, chimneys and other vertical surfaces" with flashing installed beforehand. Those are requirements in a particular guide specification, not a universal solar mounting detail. The qualified designer and installer should select compatible attachment and flashing details for the roof, manufacturer instructions and applicable local requirements.

Ask for: the mounting system by name, the manufacturer's installation instructions for slate, a drawing or description of the flashing at each attachment, and confirmation that slates disturbed around attachments will be relaid or replaced with matching slate. A sealant-only attachment on slate is a reason to stop and ask more questions.

Question 3: Who is responsible for broken slates and for leaks afterward?

Slate damage is a risk during roof work, not an inevitable outcome. The federal specification addresses integrating replacement slates with sound existing ones "to provide a smooth visual transition." The question is who pays, who sources matching slate, and for how long after installation the installer stands behind the roof.

Ask for: a written allowance or commitment covering slate breakage during installation, the source and match of replacement slate, and a workmanship warranty that covers leaks at the attachments for a stated number of years. Ask separately what your roofing warranty (if the slate roof is newer) says about third-party penetrations, and what your homeowner's insurer requires. The slate hardware manufacturer frames the coverage picture as three layers: product warranties on parts, "your installer's warranty on their work and your roof," and home insurance for weather damage. Each is a separate document.

Question 4: How will the crew get on and move around the roof?

Since foot traffic is the thing to avoid, access is a design question. Ladders, roof hooks, scaffolding or staging, protective boards, and where the crew will stand all affect how many slates break.

Ask for: the access plan in writing, including how the crew protects slates in the work area and the walking paths, and whether any access structure will be attached to the roof.

Question 5: What slate work can the proposed team show you?

Slate is a specialty within roofing, and a solar crew that has done a dozen asphalt roofs this month may have done no slate at all. The slate hardware manufacturer makes the same point from its side: "most won't take it on," and it trains or performs the slate mounting so the solar installer handles the panels. Whatever the arrangement on your project, someone on it needs to have done this before.

Ask for: examples of completed slate installations, who on the crew did the slate work, and whether a slate roofer is part of the team or the solar crew is doing the slate work itself.

Evaluate the slate roof you have before replacing it to fit a standard install

A quote that proposes replacing a serviceable slate roof with shingle so a standard mounting system can be used is a roofing decision presented as a solar decision. Sometimes the slate roof is at the end of its life and replacement is the right call; the roof and solar guide covers how to sequence that. But a slate roof with decades left in it is an asset, and the first evaluation should be whether solar can be installed on it properly, with the cost of doing it properly stated.

Those costs are real: slate work is slower and the hardware and labor are specialized, which is part of why the solar cost guide treats roof type as one of the variables that moves a price. Get the slate-specific price and the replace-and-install price side by side, with the roof's remaining life in the comparison.

The slate roof checklist

QuestionWhat a good answer looks likeAnswered
Has someone who works with slate assessed the roof?Written assessment of slates, nails, underlayment, flashings, deck
Is slate repair needed first, and who does it?Scope and price, or a statement that none is needed
What mounting method, and is it designed for slate?Named system with slate installation instructions
How is each attachment flashed?Description or drawing; slates relaid, no sealant-only attachments
Who covers broken slates and sources matching replacements?Written allowance and source
What workmanship warranty covers leaks at attachments?Stated term in writing
How does the crew access and move on the roof?Written access and protection plan
Can the team show prior slate installations?Examples and who did the slate work
Has replacing the roof been compared with installing on it?Both priced, with remaining roof life considered

If the array area is unsuitable, a complete answer may be that solar belongs on another roof plane, on a different structure, or not on this house. That's still a useful answer, and a checklist that produces it has done its job.

How Sunwise helps you take the first step with a slate-roof home

You should not have to choose solar equipment before understanding whether the roof can support the project. Start a conversation about residential solar panel installation with Sunwise and tell us that the roof is slate.

Our general consultation process includes confirming property information and reviewing roof potential. Slate needs additional, material-specific consideration: the team must confirm whether it can support your project and what qualified assessment would be needed. A general solar estimate does not establish slate suitability or a mounting method.

Have your address, a recent electric bill and any information about the roof's condition or previous repairs ready. Those are useful starting points for discussing your goals and deciding what needs to be established before a proposal. The consultation is free, with no obligation to proceed.

Talk with Sunwise about my roof and solar options

Call Sunwise: (610) 228-2480 ext. 1

Slate roof solar FAQs

Can you put solar panels on a slate roof?

Some slate roofs are suitable after assessment. The roof structure, condition, compatible mounting and flashing, and the proposed team’s experience all matter. Do not assume an attachment intended for another roofing material is suitable.

Will installing solar damage my slate roof?

Damage is possible. Ask how the team will prevent and address it through protective access, slate-specific mounting, matching replacement slate, and a written commitment on breakage and leaks.

Is my slate roof too old for solar?

Age alone doesn't decide it. Sound slate can last a very long time. The assessment looks at the condition of the slates, nails, underlayment, flashings and deck.

Should I replace my slate roof before going solar?

Replacement depends on condition, structure, project design and repair options. Before replacing a serviceable roof, get the price of installing on it properly next to the price of replacing it, with the roof's remaining life in the comparison.

Does Sunwise install solar on slate roofs?

Contact Sunwise with your address and let the team know the roof is slate. Project availability and the need for a specialist assessment must be confirmed for your property before any slate-specific installation scope is offered.

References

  • Unified Facilities Guide Specifications, UFGS 07 31 26, Slate Shingles (August 2025), foot-traffic prohibition, inspection of existing slate, cracked slate replacement, copper flashing and fitting around penetrations
  • Solar Slate Solutions, Homeowner information, a manufacturer's description of slate-specific mounting, installer training and warranty layers; cited as manufacturer evidence that slate-specific methods exist, not as an endorsement

This guide describes questions to ask. Whether solar can be installed on a particular slate roof, and how, is determined by an on-site assessment. Nothing here guarantees suitability, price or outcome.